Anti-slip Resurfacer

A two part epoxy resin based resurfacer incorporating abrasive grits for use in interior or exterior situations to provide an anti-slip finish.

Each kit (as shown above) contains sufficient quantities of resin, hardener and abrasive grits to cover approx. 1 square metre.

Application is by trowel to a clean, dry and grease free surface allowing at least 12 hours for curing (times may vary according to the prevailing temperature). Do not apply in temperatures below 60F.

Heavily trafficked areas will require re-coating at regular intervals.

Full mixing and application instructions are supplied with each kit.